You are not connected. Please login or register

 » General » Help » Stock Monitor

Stock Monitor

Go down  Message [Page 1 of 1]

1 Stock Monitor on Mon Feb 15, 2016 7:41 pm

Hi Folks, Does anyone know if the stock monitor for x380 and sj4000 camera would work with any transmitter on my flying 3D X8, was going to use X380 monitor and sj4000 camera for the 3D X8,would the monitor pick up the picture signal via camera with any transmitter I put onto 3D X8 any info would be great thanks, I don't want to take the stock transmitter off my X380 if I don't have to. Cheers Dave

View user profile

2 Re: Stock Monitor on Wed Feb 17, 2016 5:11 pm

Is this the monitor that comes with the x250 Alien?
That monitor is fitted with a 5.8Ghz 8 channel receiver.
My best guess would be if that as long as the channels match to your transmitter it would pick up the signal.
As to effective range with this type of RX and antenna that is installed, May not be great, but not having tested one I could be wrong,

View user profile

3 Re: Stock Monitor on Fri Feb 19, 2016 12:14 pm

Hi M_Levitation it is the stock monitor for x380 I think it must have receiver built in, as it only had a transmitter with it in the box to go on the side of x380 the monitor has a built in battery to run it, also do you know how to take a photo with this setup it is the stock gimbal and FPV system but camera was not but it is the same model sj4000 I think you press the centre of the wheel but nothing no still photo's maybe there is a cable missing can you or anyone help. Cheers Dave

View user profile

4 Re: Stock Monitor on Fri Feb 19, 2016 1:13 pm

If it came with its own transmitter then should have no problem getting it to work with the 380.
all you need to do is use the usb on the 4000 to connect to the transmitter with the right lead(i'll link the one I use with my 5000s which im sure is the same). Then run power from the 380 or use a separate cell to the transmitter.
I dont think you can have a photo button function with this cam but I may be mistaken. The only thing you can do is set the cam for 'time lapse' so it it takes a pic every second or so and look for the ones to keep when you return. The buttong that says photo on the 380 is misleading, it serves as tilt adjustment and when pressed starts/stops FAP mode.
Best micro usb cam lead I have tried as yet

View user profile

5 Re: Stock Monitor on Fri Feb 19, 2016 7:55 pm

Hi, I can't find a 'time lapse' setting on my sj4000 do you know where it is, I see what you mean about the photo button it does stop & start video only.

View user profile

6 Re: Stock Monitor on Sat Feb 20, 2016 9:46 am

maybe the 4000 does not have a time lapse like on the 5000.

I didnt think the button on the tx was a trigger for video either. all mine does is turn on and off 'Fly around point' Mode. Where you press it once and pull the stick back...when you release the stick the 380 will fly around the starting point keeping the front facing inwards.

View user profile

7 Re: Stock Monitor on Mon Feb 22, 2016 2:05 pm

Hi Ok that's great cheers.

View user profile

Sponsored content

Back to top  Message [Page 1 of 1]

 » General » Help » Stock Monitor

Permissions in this forum:
You cannot reply to topics in this forum