You are not connected. Please login or register

 » General » Help » 12v feed for onboard FPV Tx

12v feed for onboard FPV Tx

View previous topic View next topic Go down  Message [Page 1 of 1]

1 12v feed for onboard FPV Tx on Mon Feb 08, 2016 9:42 am

Hi - wondered if someone can advise.

I want to connect up a fpv setup on my 380 and have the hardware but wondered where to pick up the 12v for the transmitter onboard.  I have seen on the net someone using the changing connector on the battery but where do I get the socket connector from?  what is the connector called?  can I get it from somewhere like Maplin?

If not using that connector where else can I pick up 12v?

Thanks

Dave

View user profile

2 Re: 12v feed for onboard FPV Tx on Mon Feb 08, 2016 3:15 pm

sorted now - found the connectors

View user profile

3 Re: 12v feed for onboard FPV Tx on Mon Feb 08, 2016 3:44 pm

Daibrins wrote:sorted now - found the connectors

In my case I connect gimbal directly to the quad Lipos balance cable connector and FPV to a separate 1,000mA LiPo velcroed behind the gimbal.
Just do not connect anything to the X380s 12V or 5V socket. Some members might not agree but I will complete flight 200 between my three XK Detect X380 quads this week, without a glitch and working gimbals including tilt.

View user profile

Sponsored content


View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum